Academic Programs - Requirements

• Required: math A (algebra)
• Recommended: math B (geometry and trigonometry), physics

• Required: math A (algebra, geometry, and trigonometry), biology, chemistry
• Recommended: physics

• Required: math A & B (algebra, geometry, and trigonometry)
• Recommended: physics

It is essential that students are able to fully participate in clinical, caring for clients as assigned. Established entrance requirements for nursing students include being able to:

• ambulate (walk) without assistive devices
• lift at least 30 pounds
• function in a safe manner, not placing clients in jeopardy
• maintain confidentiality in regard to professional practice
• perform effectively under stress, adjusting to changing situations
• communicate effectively orally and in writing

Required: math A (algebra), biology, chemistry at high school level; if not taken in high school, then college course with "C" or better is required. Biology: BIOL 2303 human biology or BIOL 1104 general biology I. chemistry: CHEM 1013 introductory chemistry I. algebra: MATH 1004 mathematical concepts.

Recommended: Combined SAT score of 900 (critical reading and math)

• Required: math A (algebra)

• Required: math A & B (algebra, geometry, and trigonometry)
• Recommended: physics

• Required: math A & B (algebra, geometry, and trigonometry)
• Recommended: physics

Required: math A (algebra)

• Required: Math A & B (algebra, geometry, and trigonometry)
• Recommended: Physics

Required: math A (algebra)

• Required: high school biology
• Recommended: keyboarding, MS Office Professional

Technical Standards:

• Must be able to visually read computer monitor
• Must be able to use computer keyboard and mouse

• Required: math A & B (algebra, geometry, and trigonometry)
• Recommended: physics

Recommended: Math A (algebra)

Technical Standards:

Applicants in the automotive parts technology program must meet the following physical requirements.

1. Must be able to perform safely in the shop.
2. Must be able to lift 50 pounds up to eye level.
3. Must be able to communicate orally with a person 6-10 feet away.
4. Must be able to visually decipher an oscilloscope monitor and digital/analog meter, and scan tool displays.
5. Must have a valid motor vehicle license and be able to drive a standard transmission vehicle.
6. Must be able to diagnose mechanical falures that are distinguished audibly.
7. Must be able to understand information found in service repair manuals and use diagnostic flow charts.
8. Must meet qualifications for a NYS driver’s license.

• Required: math A (algebra)
• Recommended: math B (geometry and trigonometry), biology

• Required: math A (algebra)
• Recommended: math B (geometry and trigonometry), biology

• Recommended: Math A (algebra)

Technical Standards:

Applicants in the air conditioning and heating technology program must be able to meet the following physical requirements.

1. Must be able to lift 50 pounds to shoulder height.
2. Must be able to perform safely in the laboratory.
3. Must be able to communicate orally with a person 20 feet away.
4. Must be able to climb a ladder.
5. Must be able to  stand for long periods of time.
6. Must be able to visually read from a blueprint or drawing.
7. Must be able to hear a backup warning alarm.

• Recommended: Math A (algebra)

Technical Standards:

Applicants in the automotive service technician program must meet the following physical requirements.

1. Must be able to perform safely in the shop.
2. Must be able to lift 50 pounds up to eye level.
3. Must be able to communicate orally with a person 6-10 feet away.
4. Must be able to visually decipher an oscilloscope monitor and digital/analog meter, and scan tool displays.
5. Must have a valid motor vehicle license and be able to drive a standard transmission vehicle.
6. Must be able to diagnose mechanical falures that are distinguished audibly.
7. Must be able to understand information found in service repair manuals and use diagnostic flow charts.
8. Must meet qualifications for a NYS driver’s license.

Recommended: math A (algebra)

Technical Standards:

Applicants in the heavy equipment, truck and diesel technician program must meet the following physical requirements.

1. Must be able to perform safely in the shop.
2. Must be able to lift 50 pounds up to eye level.
3. Must be able to communicate orally with a person 6-10 feet away.
4. Must be able to visually decipher an oscilloscope monitor and digital/analog meter, and scan tool displays.
5. Must have a valid motor vehicle license and be able to drive a standard transmission vehicle.
6. Must be able to diagnose mechanical falures that are distinguished audibly.
7. Must be able to understand information found in service repair manuals and use diagnostic flow charts.
8. Must meet qualifications for a NYS driver’s license.

• Recommended: math A (algebra).

Technical Standards:

Applicants in the motorsports technology program must meet the following physical requirements.

1. Must be able to perform safely in the shop.
2. Must be able to lift 50 pounds up to eye level.
3. Must be able to communicate orally with a person 6-10 feet away.
4. Must be able to visually decipher an oscilloscope monitor and digital/analog meter, and scan tool displays.
5. Must have a valid motor vehicle license and be able to drive a standard transmission vehicle.
6. Must be able to diagnose mechanical falures that are distinguished audibly.
7. Must be able to understand information found in service repair manuals and use diagnostic flow charts.
8. Must meet qualifications for a NYS driver’s license.

Recommended: math A (algebra)

Technical Standards:

Applicants for the machine tool technology program must meet the following physical requirements.

1. Must be able to perform safely in the shop.
2. Must be able to lift 50 pounds up to eye level.
3. Must be able to communicate orally with a person 6-10 feet away in a shop environment.
4. Must be able to visually decipher an oscilloscope monitor and digital/analog meter, and scan tool displays.
5. Must be able to diagnose mechanical failures that are distinguished audibly.
6. Must be able to understand and retain information found in service repair manuals and use diagnostic flow charts.
7. Must be able to visually read an LCD display on welding equipment.
8. Student must have the dexterity and mobility to weld in all the welding positions to meet all requirements.
9. Good eyesight is recommended.

Recommended: In-depth knowledge of basic math, reading, and writing skills.

Technical Standards:

1. Perform lab functions while standing on their feet for extended periods of time (up to five hours) daily.
2. Be proficient in reading (for guest checks, recipes, and instructional manuals) and mathematics (for recipe conversion, cost control, and calculations associated with food production and service).
3. Write with sufficient clarity for communication with faculty, kitchen personnel, and guests.
4. Lift 40 pounds from floor to eye level.
5. Orally communicate with people six to 10 feet away.
6. Visually identify degree of product doneness.
7. Walk on a slippery floor while carrying 40 pounds with caution and safety.
8. Handle kitchen equipment, including knives, with dexterity and safety.

Expenses

In addition to regular college expenses, the student must purchase a uniform package from the Alfred State College Campus Bookstore. Uniforms may cost approximately $125-145, depending on the size ordered. All culinary arts students are required to purchase a meal plan. First semester textbooks cost approximately $500 and approximately $100 each succeeding semester. Learn about our culinary arts scholarships.

Recommended: math A (algebra)

Technical Standards for all Drafting/CAD Programs:

• Must be able to visually read computer monitor or laptop
• Must be capable to use digitizing equipment
• Must have good hand/eye coordination to operate the above

 Recommended: math A (algebra)

Technical Standards:

• Must be able to visually read computer monitor
• Must be capable to use digitizing equipment

Recommended: math A (algebra)

Due to the popularity of the heavy equipment operations program, there will be a change in the application review process for fall 2010.  Rather than accepting students strictly on a rolling admissions basis, students will be accepted based on the strength of their application for the 18 spaces that are available.  General criteria for consideration will include high school average, regents exam scores (if a New York State student), grades in related coursework, results of standardized tests (if available), and any additional information provided through letters of recommendation, a personal essay indicating career goals, and a resume.

We anticipate beginning the initial review on October 15.  Therefore, it is very important that you apply by the end of August and that the transcript, as well as any supporting documentation, be in the Alfred State Admissions Office prior to this date.

If space is still available after this initial review, applications will be accepted on a rolling admissions basis based on the criteria mentioned above.

Technical Standards:

Applicants in the heavy equipment operations program must meet the following physical requirements.

1. Must be able to lift 50 pounds to shoulder height.
2. Must be able to perform safely in the laboratory.
3. Must be able to communicate orally with a person 20 feet away.
4. Must be able to climb, un-aided, onto and off of equipment using three points of contact.
5. Must be able to stand for long periods of time.
6. Must be able to visually read from a blueprint or drawing.
7. Must be able to hear a backup warning alarm.

• Math A (algebra) required
• Math B (geometry and trigonometry) recommended

• Required: math A (algebra)
• Recommended: math B (geometry and trigonometry), biology

• Required: math A & B (algebra, geometry, and trigonometry), pre-calc; physics or chemistry
• Recommended: Both physics and chemistry

• Required: Successful completion of an AAS, AA, AS, or AOS degree
• Students must either possess an AAS, AA, AS, or AOS degree or have amassed at least 60 credit hours toward a degree, including courses that fulfill five different general education fields.
• Students entering the program should have a minimum cumulative GPA of 2.5.
• A laptop computer will be required of all technology management majors. See laptop specifications.
• Students entering this program from an AOS degree program are accepted in the program as ASOP students until completion of the following bridge courses: Nutrition (either the Wellsville or Alfred campus version), PLSC 1053 or PLSC 1043, MATH 1123 or MATH 1033, COMP 1503, HIST 1143 or HIST 2153, and American History.

Required
Math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21. Please note that a portfolio review, a minimum GPA of 2.5 in program courses, and a minimum overall cumulative GPA of 2.5 is required of all continuing and transfer students before entering the junior level studio course at Alfred State.

Recommended
Physics

Portfolio Review
All transfer students applying for entrance into the BS program must submit a portfolio.

Portfolio must include six (6) to eight (8) examples of the student's best work. Examples should be copies (not originals) of design work including any work in the two- or three-dimensional visual arts done in academic settings, practice, or as personal work. All work must include the name of applicant, date of work, and an indication of whether the work was an academic, professional, or personal project. If the item is part of a group effort, the specific role of the applicant should be included.

All portfolio material must be bound. Portfolio overall size must not be more than 10"x12" ( 25cm x 30cm) and 1" (2.5cm) thick. The applicant's name must be clearly visible on the binding. The use of slides is discouraged.

The portfolio should be submitted by mail in a padded envelope to:
Admissions Office
Alfred State College
10 Upper College Drive
Alfred, NY 14802

The department will keep portfolio materials unless a prepaid, self-addressed return envelope is mailed with the applicant's portfolio. Portfolios held by the department will be discarded if not retrieved by the applicant in one semester.

• Required: math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.
• Recommended: physics

• Required: math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.
• Recommended: physics

• Required: math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.
• Recommended: physics

• Required: math A & B (algebra, geometry, and trigonometry), biology, chemistry, SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.
• Recommended: physics

Technical Standards:

• Students must be able to physically lift 50 lbs. and possess fine motor skills which allow them to focus a microscope with fine adjustment and use forceps.

• Required: math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.

• Required: math A & B (algebra, geometry, and trigonometry), SAT and/or ACT scores with a recommended combined SAT score of 1000 (critical reading and math) or a composite ACT score of 21.

• High school biology required
• Recommended: keyboarding, MS Office Professional

Technical Standards:

• Must be able to visually read computer monitor
• Must be able to use computer keyboard and mouse

• Required: Math A (algebra)